I-Purge Modular Inflatable Bladder System

– Name Product: Modular Inflatable Bladder System
– Brand: Aquasol
– Type: I-Purge
– Part No: ABLD
– Size: 2″ to 48″
– Length: 11″ to 42″
– Temperatures: up to 1200°F (650°C)
– Made in: USA

Description

Aquasol I-Purge Modular Inflatable Bladder System

I-Purge Modular Inflatable Bladder System

I-Purge Modular Inflatable Bladder System

 

About

The revolutionary, patent-pending I-Purge Modular Inflatable Bladder System is the most innovative and versatile pipe purging system available. I-Purge creates an impermeable seal to consume the least amount of purge gas during pipe purging and welding, saving time and money, while achieving consistent, high-quality welds.

Manufactured in the USA, this long-term, reusable bladder system enables operators to satisfy a myriad of purge requirements with one interchangeable solution. The I-Purge comes equipped with several highly advanced features such as its Quick Connect Fittings that snap-in place and allow easy assembly and disassembly of components. The I-Purge also features an extended length, high heat resistant harness that allows the bladders to be placed outside the heat affected zone and can also sufficiently accommodate any pre-heating or high heat applications.

These state-of-the-art features allow the operator to create multiple configurations, including a one sided pipe stopper and a reducer. Bladders are available in sizes ranging from 2 to 48″ (51- 1219 mm) and may be purchased either individually or as a complete system, a distinct advantage should additional sizes be desired or a component need replacing.

Ideal for fabrication shops, the I-Purge surpasses existing technology with its advanced design and provides the complete solution for all pipe purging needs.

 

Features and Benefits

Inflatable Bladders Modules A & B

I-Purge Modular Inflatable Bladder System

  • Manufactured in the USA from the highest quality materials
  • Inflated bladders create an impermeable, air tight seal on pipe wall
  • Spark resistant, durable exterior cover
  • Heavy-duty interior inflatable bag
  • Re-usable, long-lasting solution for purging multiple pipes of the same diameter
High Heat Extended Harnesses

I-Purge Modular Inflatable Bladder System

  • Internal hose and protective external fiberglass sleeve capable of withstanding high temperatures
  • Flexible bridge harness easily navigates through pipes, including elbows and tees over 90°
  • Kink resistant hose assures continuous gas supply
  • Complete with luminescent indicator for accurate alignment at root gap
  • Various lengths of harnesses are available to accommodate heat affected zone (HAZ) during pre-heating and high heat applications
  • I-Purge sizes 36″ and greater are equipped with a high flow harness to expedite inflation
Quick Connect Interchangeable Fittings

  • Push-button feature enables modules to snap-in-place in seconds
  • State-of-the-art technology allows for greater versatility and easy assembly – enabling the user to create multiple configurations
  • Easy change and replacement of components to avoid costly re-purchase of complete system, with spare parts available for purchase
  • Corrosion resistant proven lock mechanism for secure connection
Proprietary Relief Valve

  • Factory pre-set relief valves allow for precise flow rates while minimizing set-up time and reducing gas consumption
  • Aids in maintenance of optimum seal on pipe wall
  • Prevents risk of over inflation
  • Low profile relief valve available on 2″ and 3″ models
Inert Gas Diffuser
  • Patent-pending technology
  • Reduces turbulence by dispersing inert gas equally in all directions within the weld zone, improving weld quality and consistency
Tri-Flow Inner Tubing System (BLUE, BLACK & WHITE Hoses)
Multiple inlet/exhaust ports for faster, more efficient purging

I-Purge Modular Inflatable Bladder System

Separate Connections:
BLUE –  Inflation of Bladders
Initial function is to inflate bladders then flood weld zone with noble gas

BLACK – Increase Gas Distribution Within Weld Zone
Designed to expedite purging, the secondary (BLACK) purge hose is used to flood the weld zone with inert gas and evacuate oxygen at a faster rate

WHITE  –  Exhaust Connection
Connect this hose to an Oxygen Monitor, such as Aquasol’s PRO OX®-100 that obtains readings down to 100 PPM (0.01%), for continuous or spot monitoring of oxygen in the weld zone

Pull Loops

  • Strong pull loops can be connected to a rope or chain to insert or remove the I-Purge
  • It is important that bladders be deflated before insertion or removal
  • Moderate tension (approx. 5 lbs.) should be applied on pull-wires to prevent sagging of the harness during installation and operation
Carrying Bag

I-Purge Modular Inflatable Bladder System

  • When welding is complete, bladders can be deflated, extracted, cleaned and stored in the provided carrying bag
  • Carrying bag protects the bladder when not in use from dust and debris in most industrial work environments, prolonging life
I-Purge Reducer

I-Purge Modular Inflatable Bladder System

  • Unlike other models with permanent fittings, a pipe reducer can be easily created by simply connecting two bladders of different, yet similar diameters
  • Combine different sizes to create unique pipe configurations
I-Purge Isolator Inflatable Pipe Stopper & Single Purge Bladder
I-Purge Modular Inflatable Bladder System

I-Purge Modular Inflatable Bladder System

  • The I-Purge Isolator is designed to function as a pipe plug for a wide range of applications, including purging of valves or tanks, as well as non-purging applications such as pipe system sealing for servicing, cleaning and inspection
  • Constructed of heavy-duty materials designed to withstand the extreme conditions of the petrochemical, utility and construction industries
I-Purge® Isolator Adaptors:

Make the most out of our modular design!

Convert your I-Purge® two bag systems into one-sided isolators for challenging weld geometry. Both our I-Purge® and I-Purge ®X bladders are convertible with our innovative modular design!

I-Purge® Mod-A Adaptor:             A quick connect diffuser for your Mod-A I-Purge® bladder

I-Purge® Mod-B Adaptor:             A length of hose with fittings to hook your I-Purge® Mod B bladder to your Argon tank

 

How I-Purge Works

I-Purge Modular System Components: Equipped with the most Advanced Interchangeable Components

1. Module A                    5. Quick Connection to Module A          9. Inflation & Purge (BLUE) Hose
2. Module B                    6. Relief Valve                        10. Luminescent Indicator
3. Quick Connection to Module B      7. Direct Purge (BLACK) Hose      11. Pull Loops
4. Fiberglass High Heat Bridge Harness    8. Exhaust Monitor Connection  12. Gas Diffuser

Quick Instruction Guide

1. Ensure I-Purge is fully assembled (i.e. Modules are securely connected to harness using quick connect fittings).

2. If necessary, connect rope, chain, or wire to the pull loops on the ends of the bladder
modules. This will allow easy insertion and removal of the system.

3. Connect inert gas lines to the BLUE and BLACK hoses.
BLUE gas hose is required to inflate the purge bladders.
BLACK gas hose is optional to expedite the purging process

4. Position the purge unit in the pipe using the luminescent indicator as a guide to center
the system across the root gap

I-Purge Modular Inflatable Bladder System

5. Turn the gas supply on to inflate the bladders and purge the weld zone.
Recommended Flow Rates for Purging:
BLUE gas hose should transfer inert gas at 10-32 SCFH (5-15 LPM) for models 2″ – 34″ and 60 SCFH (28.5 LPM) for models 36″– 48″

6. Once a tight seal has been achieved, commence welding while maintaining flow rate.
Recommended Flow Rates During Welding:
BLUE gas hose should transfer inert gas at 15-30 SCFH (7.5-15 LPM)

7. After the weld is complete, turn off the gas supply to deflate the bladders. Once the
heat zone has sufficiently cooled, remove I-Purge from the pipe. Be sure to disconnect
all gas lines and monitoring equipment.

8. Clean I-Purge and store in the provided carrying bag when it is not in use.

Types & Sizes

I-Purge Standard Inflatable Systems (Sold as Complete System)
ITEM NO DIMENSIONS STANDARD HARNESS LENGTH DESCRIPTION
English Metric English Metric
ABLD 2* 2″ 51 mm 11″ 279 mm 2″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 3* 3″ 76 mm 11″ 279 mm 3″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 4* 4″ 102 mm 11″ 279 mm 4″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 5* 5″ 127 mm 11″ 279 mm 5″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 6* 6″ 152 mm 11″ 279 mm 6″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 8* 8″ 203 mm 11″ 279 mm 8″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 10* 10″ 254 mm 12″ 305 mm 10″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 12* 12″ 305 mm 12″ 305 mm 12″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 14* 14″ 356 mm 16″ 406 mm 14″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 16* 16″ 406 mm 16″ 406 mm 16″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 18* 18″ 457 mm 16″ 406 mm 18″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 20* 20″ 508 mm 18″ 457 mm 20″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 22* 22″ 559 mm 18″ 457 mm 22″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 24* 24″ 610 mm 18″ 457 mm 24″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 26* 26″ 660 mm 20″ 509 mm 26″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 28* 28″ 711 mm 20″ 509 mm 28″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 30* 30″ 762 mm 20″ 509 mm 30″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 32* 32″ 813 mm 20″ 509 mm 32″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 34* 34″ 864 mm 20″ 509 mm 34″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 36* 36″ 914 mm 20″ 509 mm 36″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 38* 38″ 965 mm 36″ 914 mm 38″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 40* 40″ 1016 mm 36″ 914 mm 40″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 42* 42″ 1066 mm 36″ 914 mm 42″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 44* 44″ 1117 mm 36″ 914 mm 44″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 46* 46″ 1168 mm 42″ 1067 mm 46″ I-Purge Double Purge Bag System with High Heat Harness
ABLD 48* 48″ 1219 mm 42″ 1067 mm 48″ I-Purge Double Purge Bag System with High Heat Harness

Modular Components (ABLD-Size-MOD A and ABLD-Size-MOD B)Sold Separately

I-Purge Isolator®

ITEM NO DIMENSIONS DESCRIPTION
English Metric
ISO 2 2″ 51 mm 2″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 3 3″ 76 mm 3″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 4 4″ 102 mm 4″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 5 5″ 127 mm 5″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 6 6″ 152 mm 6″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 8 8″ 203 mm 8″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 10 10″ 254 mm 10″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 12 12″ 305 mm 12″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 14 14″ 356 mm 14″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 16 16″ 406 mm 16″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 18 18″ 457 mm 18″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 20 20″ 508 mm 20″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 22 22″ 559 mm 22″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 24 24″ 610 mm 24″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 26 26″ 660 mm 26″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 28 28″ 711 mm 28″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 30 30″ 765 mm 30″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 32 32″ 813 mm 32″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 34 34″ 863 mm 34″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 36 36″ 914 mm 36″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 38 38″ 965 mm 38″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 40 40″ 1016 mm 40″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 42 42″ 1066 mm 42″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 44 44″ 1117 mm 44″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 46 46″ 1168 mm 46″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve
ISO 48 48″ 1219 mm 48″ I-Purge Isolator One-Sided Plug with 10′ Hose and Valve

Accessory Components Optional Harness Lengths

ITEM NO DIMENSIONS DESCRIPTION
English Metric
ABLD-ELH-24 24″ 610 mm 24″ (2′) Extended Length High Heat Harness
ABLD-ELH-36 36″ 914 mm 36″ (3′) Extended Length High Heat Harness
ABLD-ELH-48 48″ 1219 mm 48″ (4′) Extended Length High Heat Harness
ABLD-ELH-72 72″ 1828 mm 72″ (6′) Extended Length High Heat Harness
ABLD-ELH-CUSTOM Any Size Any Size Custom Lengths Available Upon Request
ABLD-CNADP NA NA 1/4″ Female MPT to 1/4″ Female BSPP Conversion

Aquasol Viet Nam specializes in supplying and distributing products of Aquasol I-Purge Modular Inflatable Bladder System in Vung Tau and all over Vietnam with high quality and reasonable price. Contact us when you need to buy products or you have any requests for product information

Reviews

There are no reviews yet.

Be the first to review “I-Purge Modular Inflatable Bladder System”

Your email address will not be published. Required fields are marked *